Osram Opto Semiconductors, one of the largest lighting companies in the world, has developed a new concept for uniform solder pads to make its Oslon family easier for customers to use LEDs from different manufacturers (second source) and reducing the costs of storage and processes modification.
 
The adapted solder pad design enables two different LED types to be accommodated on one board.
 
Only one adjustment to board layout required
For ceramic LED components, to which the entire Oslon family belongs, Osram Opto Semiconductors in Regensburg has therefore developed a concept that makes the board solder pad design so adaptable that it can be used for LED components from at least two different manufacturers. The concept can also be used for metal core, FR4 and ceramic boards.
 
Dr. Christian Gärtner, Oslon Project Manager in Product Development General Lighting at Osram Opto Semiconductors, explains: “Only a small adjustment to the process is needed, and the benefits are real and long-term.” The combined board design comes from the design of one of the two LED components. The individual solder surfaces are divided into segments – into electrically connected and electrically disconnected. By selecting appropriate spacings between the solder surfaces the second LED product – rotated through 90° – can be attached to the uniform board design. The anode and cathode of the two LED components are connected to the same electrically contacted segments. By dividing the solder surfaces the two LED types automatically align themselves to the edges of the solder surfaces during the reflow solder process. For both LED components the luminous area is in the same lateral position on the board – in other words in the same alignment in the board plane. If the LEDs have the same emission behavior the same secondary lenses and reflectors can be used. This means that neither the LED components nor the end application are changed in terms of their characteristics.
 
Making the most of the benefits
The new concept makes it much easier to handle LED components from different manufacturers because there is no need any more to make modifications to the board design. What’s more, there is no need for duplicated storage so this reduces costs still further. Christian Gärtner sums up the benefits as follows: “The efficiency and performance of our Oslon family is undisputed worldwide. The concept for a flexible solder pad design gives our customers the freedom to incorporate a second source for our high-power LED components without having to suffer restrictions due to mechanical parameters.”