Home  English    
 
 
 
 
   
 
 
        Exhibition News
        Industry News
        Certification
 
 
 
 
 
 
 
 
 
Home > News > Industry News
 
 
Osram sets new record on chip prototype
Authors£º Updated£º2012/12/10 8:35:09 Hits£º397´Î
Osram has set a new record on an infrared thin-film chip prototype with an efficiency of up to 72 percent. At 930 milliwatts from an operating current of 1 amp, its light output under laboratory conditions is 25 percent higher than that of the chips currently available on the market, which means that future infrared LEDs can be made even more energy-efficient. The efficiency was measured at room temperature and at a dc current up to 1 amp. With a wavelength of 850 nanometers the chip has been designed in particular for infrared illumination applications.
 
The results from the R&D laboratory in Regensburg have created a new milestone. The prototype of a 1 mm2 chip in infrared thin-film chip technology has achieved an efficiency of 72 percent from an operating current of 100 milliamps. This efficiency, known as wall plug efficiency (WPE), indicates the ration of the radiated power to the electrical input power.
 
The external quantum efficiency (EQE), in other words the probability of creating a photon and its emission from the LED chip per electron, is as high as 67 percent and remains above 64 percent up to an operating current of 1 amp.
 
The wavelength of the chip prototype of 850 nanometers is perfect for infrared illumination, particularly for surveillance tasks and use with CCTV cameras. There are also potential safety applications in the automotive sector, such as precrash sensors and illumination sources for night vision systems.
 
The way in which the efficiency and brightness have been increased can be transferred from 850 nanometers to other wavelengths,” said Markus Bröll, Project Manager for the development of IRED chips at Osram Opto Semiconductors in Regensburg. “This means that it will be possible to create highly energy-efficient solutions for infrared lighting in the future”. Fewer components will be needed in multi-chip applications, saving both money and energy.
 
The results of this development work are now being implemented stage by stage. The new chip is expected to go into series production between the start and middle of next year.
 

 



 
 
 
 
 
  Products    |    New & Events    |    Illumination Design    |    About Us    |    Contact Us
Copyright © 2010 Magic Lighting Co.,Ltd All Rights Reserved. ISO9001£º2008